直流抵抗計 TECHMIZE 型式：TH2518A【国内正規品】

販売価格(税抜):¥395,000

■製品仕様：
16チャンネル、抵抗確度: 0.05%、範囲: 10uΩ-200kΩ

アプリケーション

■ コンポーネント

抵抗器、インダクタ、トランスフォーマ、モーター、リレー、回路のはんだ付けポイント、コンデンサのリベット接続ポイント

■ ケーブル、コネクタ

線材、コネクタ、スイッチ

■ 材料

熱感知材料（ヒューズ、サーミスタ用センサー）、金属箔などの導電性材料

■ 新エネルギー

電動車用バッテリーパック接続ブリッジ、バッテリー接続用抵抗器

Model	TH2518	TH2518A
Measuring Parameters	DC resistance, temperature	DC resistance
Resistance Test Range	10μΩ — 200kΩ
Basic Resistance Test Accuracy	0.05%
Resistance Range	Auto and manual (200mΩ, 2Ω, 20Ω, 200Ω, 2kΩ, 20kΩ, 200kΩ)
Temperature Sensor Type	PT500 platinum resistance, PT100 platinum resistance, analog voltage input Temperature test range	——
Temperature Test Range	PT100,P T500:-10℃ — 99.9℃，Analog:0V — 2V	——
Temperature Test Accuracy	PT100, PT500:0.3%*measured value ±0.5℃，Analog:±1%Rd ± 3mV	——
Measurement Mode	Stand-alone, scanning
Scanning Channels	15 channels/boards, and up to 6 boards and 90 channels can be inserted. The board channel is for scanning test, and it is synchronous test between the test boards.
Test Terminal Selection of Test Channel	Arbitrary configuration between channels (programmable)
Test Current	≤100mA
Measurement Speed	ingle board: 100 times / sec, 40 times / sec, 2 times / sec, 6 boards: 600 times / sec, 240 times / sec, 12 times / sec
Temperature Compensation	√	——
Display Results	Simultaneous display the test results of 16 channels and support page turning
Short-circuit Clear Correction	Support full-scale short-circuit clearing for all channels
Comparators	Comparison boundaries are set separately for each test channel
Limit Mode	ABSDev、ABS、%
Trigger Mode	Auto trigger, manual trigger, bus trigger, Handler trigger, foot switch trigger
Test Terminal	Four-terminal test
Storage	30 sets of instrument parameters